<p>Designed for holding and placing either labial or lingual brackets. Features spring-loaded reverse action to hold brackets until release is desired. 800-8000<br></p>

The tip wedge between the edges of the bracket base and tooth surface to safely and comfortably remove direct bond brackets. Works well for steel, ceramic and plastic brackets of all types. 800-0345

The working edges are carefully beveled to avoid wire damage. The cone and pyramid beaks are ground to a 0.8 diameter at the tip to have clearance angles on the sides alling for a wide spring-back. The adaptable loop forming pliers for round wires up to .030” (.76 mm) in diameter. 803-0414

<p>Specifically designed to remove excess adhesive after debonding these pliers come with the 3/16” pad already loaded in the working end, and with an extra 1/4” to use. The alignment of the tip and occlusal pad is ideal for posterior band removal. Additional features include, a carbide inserted tip on the short break and an interchangeable plastic pad. Replacement pads can be re-ordered as needed. 803-0410<br></p>

<p>Specifically designed with shorter tips allowing easier access to anterior teeth, these pliers are used to remove excess adhesive after debonding these pliers come with the 3/16” pad already loaded in the working end, and with an extra 1/4” to use. The alignment of the tip and occlusal pad is ideal for posterior band removal. Additional features include, a carbide inserted tip on the short break and an interchangeable plastic pad. Replacement pads can be re-ordered as needed. 803-0210 Replacement Carbide Tip 803-0975<br></p>

<p class="MsoNormal">A black oxide finish distinguishes itself from other cutters. Designed with a 15º cutting-angle for easy intoral access, the extra-strong edges make it ideal for cutting all sizes and types of archwhires. Maximum cutting capacity: .022” x .028” (.56 mm x .71 mm). 800-1200</p><div><br></div>

The flush cut feature of this instrument allows the archwire to be cut with flush with a buccal tube surface. When used intraorally it safely holds the cut portion to be discarded. Patient comfort is enhanced by the smooth, tapered tip. Can easily cut all types of wires ranging from .012” (.30 mm) to .021” x .025” (.53 mm x .64 mm). 800-0516

Constructed of stainless steel and specifically calibrated for Inspire ICE brackets. The handle is ergonomically designed to ensure a steady and comfortable grip. For use only with Inspire ICE brackets. 866-4020

Concave beak is contoured for making uniform Omega loops. The replaceable tip is .090” in length and has three sections of .045,” .060” and .075” with electroetched finish to prevent wire slippage. 800-0352 Replacement Tips (2) and Wrench 800-1400