With half the force but twice the working range of stainless steel, TMA has indications for all stages of treatment. Because of its intermediate stiffness between stainless steel and the nickel-titanium memory alloys, it is especially beneficial as a main working archwire. TMA has good flexibility and springback characteristics along with predictable forces for consistent control.

Ormco stainless steel wires are made of 300 series alloys. The wires are manufactured to the highest quality for dimensional precision and surface finish, providing optimum forces for arch stability, resilience, formability and sliding mechanics.

Ormco’s trademark nickel-titanium wire, Ni-Ti has the resiliency and high springback necessary during treatment. Ni-Ti is indicated for initial leveling, aligning and rotational control.

Ormco’s trademark nickel-titanium wire, Ni-Ti has the resiliency and high springback necessary during treatment. Ni-Ti is indicated for initial leveling, aligning and rotational control.

This groove facilitates wire location with a longer cone than a standard bird beak, making it useful for forming precise loops in light wires up to .020” (.51 mm). 803-0415

This plier offers a positive grip of wire useful for contouring and bending wires up to .030” (.76 mm). all three beaks are fully radiused and all working edges are carefully beveled to avoid wire damage. 803-0413

Similar to model 803-0413, the pliers tips are rounded for ease of contouring light wires up to .030” (.76 mm). 803-0412

Extremely well balanced and lip-safe with serrated tips 3.2 mm (1/8”) in diameter, this plier is useful for placement and removal of archwires, pins and other auxiliaries. 803-0408

Both edes of the thin blades are fully radiused and stepped-in for precise forming of loops in four lengths – 3 mm, 4 mm, 5 mm, and 6 mm. The grooves at base provide aid in closing loops, while all working edges are carefully beveled to avoid wire damage. Wire capacity: .022” (.53 mm) 803-0405